Short Answer
For a boxed puzzle made from one complete puzzle sheet, South Print checks that the puzzle is complete before breaking it apart. Only complete puzzles with no missing pieces proceed to that stage. After packaging, South Print also carries out sampling inspection using AQL 2.5.
These controls reduce the risk of missing pieces, but they are not a zero-defect guarantee. In occasional cases, a piece can become caught inside the breakup equipment, particularly when individual pieces are relatively large.
Two support arrangements can be discussed: preparing complete assembled puzzles to ship with the order so the buyer can provide local replacement-piece service, or using missing-piece photographs and the corresponding order record to arrange a credit for confirmed affected products against a subsequent order.
Discuss your custom puzzle project and agree the inspection and support arrangements before production.
Check Completeness Before the Puzzle Is Broken Apart
For the construction described here, one box contains the pieces from one complete puzzle. South Print checks that the puzzle is intact before it enters the breakup process. A puzzle identified as incomplete does not proceed to that stage.
This is a process-stage completeness check, not a claim that every packaged set is subsequently reassembled. Keep those two ideas separate when discussing quality control with a buyer.
The sequence matters: confirming a complete puzzle before breakup helps prevent an already incomplete puzzle from being packed. It does not establish that nothing can happen during the later breakup and packing stages.
This article describes that confirmed one-puzzle-per-box workflow. Other product constructions or multi-puzzle packs need their own agreed inspection arrangements.
Why a Missing Piece Can Still Occur
A piece may occasionally become caught inside the breakup machine. South Print identifies relatively large individual pieces as a situation where this can happen.
That residual risk is why the article does not promise that checking completeness before breakup eliminates every missing-piece case. It is also why buyer support should be planned alongside production checks rather than discussed only after a complaint.
No measured defect rate is stated here. Do not interpret “occasional” as a numerical missing-piece guarantee or assume that every reported missing piece has the same cause.
For a report from a customer, use the actual photograph and order information to identify the affected product before deciding the next step.
What Packaging-Stage AQL 2.5 Inspection Means
South Print conducts sampling inspection after packaging using AQL 2.5. Sampling is different from inspecting every packaged item, and it cannot guarantee that every unexamined unit is free of defects.
AQL 2.5 does not mean that 2.5% of the order is automatically inspected. Nor is it a promise that exactly 2.5% of products may have missing pieces. The ISO 2859-1 overview describes sampling schemes indexed by AQL, with sample sizes and acceptance or rejection thresholds determined through the sampling arrangement.
For an actual purchase order, confirm the applicable inspection plan rather than relying on the AQL number alone. Relevant points to agree include:
- The lot size and inspection level.
- The sampling method and sample quantity.
- The checks included in the inspection.
- How defects are classified.
- The acceptance and rejection criteria.
- What happens if the inspected lot does not meet the agreed criteria.
This article does not specify a universal sample size, an acceptance count or a particular edition of a standard used by the factory. Those details must be confirmed for the order. It also does not claim that AQL 2.5 is automatically the appropriate criterion for every defect category.
If your retailer or inspection provider requires a particular plan or report, share it before production so the scope can be reviewed.
Option One: Prepare Complete Puzzles for Local Replacement Service
For buyers who want to help their customers locally, South Print can discuss preparing complete assembled puzzles and sending them with the shipment. The buyer can use these as a source of replacement pieces.
Agree this arrangement before dispatch. Confirm the number of reserve puzzles, which designs they cover, their packing and any associated cost. Do not assume an automatic free reserve quantity or a standard percentage of the order.
Keep the reserve puzzles identifiable by design and order. For a missing-piece request, the buyer needs to match the affected puzzle with the appropriate reference and check the replacement piece’s fit and printed image.
Do not promise that a spare piece from any earlier run, different cutting pattern or other design will fit. Ask South Print to confirm the appropriate reserve stock for the actual order.
This option puts the local replacement service with the buyer. It is not a promise that South Print sends individual replacement pieces directly to every end consumer worldwide.
Option Two: Credit Confirmed Affected Products Against a Later Order
For missing-piece cases, South Print generally asks the customer to provide a missing-piece photograph and the corresponding order record.
After the affected products are confirmed, the credit is based on the number of products with missing pieces and is applied against a subsequent order’s payment. It is not described as a cash refund.
Count affected products, not the number of missing individual pieces. For example, if one puzzle is missing two pieces, that is one affected product, not two products for credit purposes. The actual credit amount and how it will be recorded should be confirmed with South Print; no universal dollar amount or calculation rate is specified here.
Do not assume that a credit has already been applied simply because a report was sent. Obtain confirmation of the affected quantity, agreed credit and the later order against which it will be used.
The two support options should be agreed for the project. Do not assume local replacement stock and a credit automatically apply together to the same case.
Make a Missing-Piece Report Easy to Match to the Order
The normal evidence request is simple: the missing-piece photo and order record. To reduce follow-up questions, the buyer can organize them in a short case list.
| Record | Purpose |
|---|---|
| Photograph showing the missing area | Helps identify the reported issue and position |
| Corresponding order reference | Links the case to the supplied product |
| Design identifier, where several designs were ordered | Helps locate the correct artwork or reserve puzzle |
| Affected product count | Separates the number of affected puzzles from missing-piece count |
| Agreed outcome | Records local replacement or the confirmed future-order credit |
The design identifier and case list are organizational aids, not a newly imposed list of mandatory documents. The usual evidence remains the photograph and corresponding order record.
Avoid recording the same affected puzzle twice when several photographs show one case. If the buyer is collecting reports from end customers, keep each case linked to the relevant supplied order.
Agree Support Alongside the Purchase Specification
Before placing an order, ask South Print to confirm:
- Whether the one-complete-puzzle-per-box workflow applies.
- The completeness check before breakup and the agreed packaged-product inspection scope.
- The applicable sampling plan behind AQL 2.5.
- Whether reserve assembled puzzles should be supplied for local service.
- The designs, quantities, packing and cost of any agreed reserve stock.
- How missing-piece photographs and order references should be submitted.
- How confirmed future-order credits will be recorded.
Sample approval and packaged-batch inspection serve different purposes. The puzzle sample-approval guide helps define the reference product, while the inspection and support arrangements address the supplied order.
For later purchases, review the puzzle reorder guide instead of assuming that old files, samples, cutting patterns and prices remain applicable indefinitely.
Plan inspection and buyer support for your puzzle order with an explicit process and a practical response when a missing-piece case is reported.
FAQ
Does South Print check puzzles before breaking them apart?
Yes. For the described one-complete-puzzle-per-box workflow, completeness is checked before breakup, and only puzzles with no missing pieces proceed to that stage.
Can missing pieces still occur after that check?
Yes. A piece can occasionally become caught inside the breakup equipment, particularly with relatively large individual pieces. The process reduces risk but does not guarantee zero missing-piece cases.
Does AQL 2.5 mean 2.5% of the order is inspected?
No. AQL is not the percentage of units sampled. Confirm the lot size, inspection level, sample quantity and acceptance criteria in the actual inspection plan.
Can buyers arrange local replacement-piece service?
South Print can discuss supplying complete assembled reserve puzzles with the order so the buyer can provide local replacement pieces. Confirm designs, quantities, packing, fit and costs in advance.
What is needed for a missing-piece credit?
The customer generally provides missing-piece photographs and the corresponding order record. Credit for confirmed affected products is applied against a subsequent order, not paid as a cash refund; confirm the amount and application with South Print.